How Should a Sediment Separator Be Used?
Sediment Separator
Systems that prevent foreign substances in the water from entering the plumbing system are called sediment separators. These systems allow sediments to be discharged to the drain. Foreign substances in the plumbing system can cause corrosion in the installations. As a result, malfunctions occur in the parts. Situations like sediment formation are frequently encountered, especially in underfloor heating and plumbing systems using plastic pipes. Because there is oxygen diffusion in these systems, more dirt formation is observed. Therefore, the use of a sediment separator is extremely important. The formed sediments cause difficulty in heat transfer on heat transfer surfaces. In this case, problems of decreased efficiency are experienced. It is extremely important to regularly clean the dirt in the sediment separator. In this way, situations like malfunctions are avoided. You can get detailed service regarding sediment separators from the site https://www.vefaheat.com/separatorler/paket-hava-tortu-ayirici/.
Sediment Separator Working Principle
Regular cleaning and maintenance of classic type sediment separators are extremely important. If the sediment separators are not cleaned regularly, problems such as filter clogging may occur. This situation causes a lot of dirt to accumulate in the filters. This also prevents water passage. In addition, filter clogging causes a decrease in system efficiency. The cleaning of new generation sediment separators is much easier. Drainage can be easily performed by opening the valves. The dirt trapped in the sediment traps will accumulate at the bottom of the device after passing through the filter. In this way, situations such as clogging in the system are not encountered. The accumulated dirt can be quickly discharged through the valve at the bottom of the device. To prevent situations like corrosion in the installations and to effectively separate sediments from the installation, an air separator should be located at the outlet of the boilers. It is extremely important to have a sediment separator at the boiler return section.
