What is a Central Server in Sensors?

Application

It delivers all data sent from the GSM modem to the defined port of the central servers. There is a listener that monitors these ports. At this point, the listener receives all incoming data and transfers it into the server, and at the same time, the server application software saves the received information into the database. This saved information is used in the most effective ways to determine whether the seats in the seating sensor areas are occupied or empty. Within the application, it visually shows the seat statuses with representative bus interior seating arrangements.

What are the Results and Recommendations?

The necessary software coding is carried out between the defined system architecture areas and the third party. First, the data coming from the weight sensors must be received from the GSM module interface. The data, processed by the software within the module, is sent to the defined IP address. Special codes are used for data transmission, showing the seat sensor and seat occupancy systems. These studies generally involve system architecture and applications related to the remote tracking and monitoring of service vehicles. The seat sensor and seat occupancy rates of service vehicles are determined in a short time. With these systems, the seat occupancy status information of pre-defined service vehicles is visible in real-time on screens set up in remote locations. Additionally, with a GPS hardware and software addition to this system, information can be obtained in real-time about which seats are emptied and filled at which points.