Setting Up the Iron Frame
The setup of tents is generally done in two ways. These are the setups for
Yörük tents on an iron frame and on wood. During the setup, the tents are first sewn in the most suitable way according to the special requests of the individuals and are sent to the users in 2 parts. One of these is the upper part of the tents, and the other is the sections that cover the surroundings of the tents. Tents to be set up on an iron frame are made in very simple and easy ways. The upper parts of the Yörük tents, which are in two pieces, are laid completely on the ground, and the columns, sewn in thin strips, are used as a basis, adjusted so that the columns come to the lower part of the tent. Then, ropes are tied to the holes at the ends of the columns and thrown over the frame to the other side, where they are hung. The parts sent for the surroundings of the tents are started from one side of the tents, stretched well, and wrapped around, and the tents are completed in this way.
Setting Up Tents with Wooden Poles
Setting up on wooden poles is a laborious task. The upper parts of the Yörük tents, which are in two pieces, should be laid on the ground, and the sewn columns, located in thin strips, should be used as a basis, adjusted to be at the lower parts of the tents. After tying ropes to all the ends of the columns, the tent should be stretched evenly. The part for the surroundings of the tents to be set up on wooden poles should be started from one side of the tents, stretched well, and wrapped around; the process will be completed in this way. You can visit the site for details on this topic.
